HTML sitemap for articles
Current Press Releases
Easy mounting on the bike
1. Check whether there are suitable mounting holes on the frame struts of the rear wheel. If this is not the case, use the installation adapter+.
2. Screw the flex adapters into the mounting holes.
3. Place I LOCK IT on the rear wheel of your bike so that you can attach the screws to the flex adapters.
4. Tighten the screws and I LOCK IT is firmly installed on your bike.
Does I LOCK IT fit your bike?
Bikes are as different as their owners. With trekking, city or e-bikes, there are a variety of shapes and features. That's why I LOCK IT has been developed to be compatible with most models.
Simply test whether I LOCK IT GPS and I LOCK IT+ fits your bike or e-bike!
With our assembly check you can easily find out whether I LOCK IT fits your bike.
template
Are you unsure whether I LOCK IT fits your bicycle or e-bike?
Print out thetemplate in its original size and hold it up to your bike or e-bike.
Alternatively, you can simply order the template from us.
I LOCK IT fits, but you don't have any mounting brackets?
The I LOCK IT installation adapter+ enables the installation of I LOCK IT on bicycles and e-bikes without mounting fixtures.
I LOCK IT can also be installed using the installation adapter+ in the event that the mounting brackets on your bike are too close together or too far apart.
Use the I LOCK IT template to easily check whether your mounting brackets are compatible with I LOCK IT.
Easy assembly with the installation adapters+
1. Place the installation adapters+ around the bicycle frame and fix them loosely for the time being.
2. Screw the flex adapters into the mounting holes of the installation adapter+.
3. Place I LOCK IT on the rear wheel of your bike so that you can attach the screws to the flex adapters.
4. Tighten the screws. Then you can finally fix the installation adapter+ and remove the protruding plastic straps.